AIRbar T-Bar Mount 
The AIRbar T-Bar Mount 1.0 luminaire with Suspended Ceiling Ribbon Cable Connector allows for easy integration into drop ceiling T-Bar grid applications, and allows for ultimate flexibility for all lighting projects. Its ultra slim profile at 5mm thick and lightweight housing directly attaches to the T-Bar grid with integrated magnets. Capable of 770 lumens/foot @ 125 lumens per watt efficacy, the AIRbar can be installed individually or linked continuously. A truly sustainable light source comprised of ceramic and aluminum, the AIRbar uses 50x fewer raw materials than conventional light sources (measured by weight of fixtures in a typical installation).
Spec Sheets
AIRBAR T BAR MOUNT 05 SPEC SHEETR0K.PDF
AIRBAR T BAR MOUNT 10 SPEC SHEETP2T.PDF
Fixture Details
Ballast/Driver:
6.2W per foot, 24.7Vdc Constant Voltage input; Remote Class 2 Power Supply required (refer to Power Supply section); Maximum 15 foot run with one 100W power supply; Unlimited run lengths using multiple power supplies; Dimmable to less than 1 percent (refer to Control Accessories section); Interconnection/Cabling (supplied by others): Plenum Rated 2-18 AWG Stranded with Flame Resistant Insulation. Example: BELDEN # 6300UE; Integrated thermal feedback protection prevents overheating under abnormal power conditions
Mounting:
15/16 T-bar applications; Magnetically attaches directly to steel T-bar Grid using powerful magnets; Ribbon Cable Connector easily fits between ceiling tiles and T-Bar; Seismic U-Clip included (mechanically secures Ribbon Cable to T-Bar)
Housing:
1" (nominal) wide housing delivers 770 lumens per foot; 24" L x 0.94" W x 0.2" H; 0.7oz per foot (66g/m); The ceramic light emitting surface acts as the heatsink and circuit board for the chip scale package LEDs; The light weight aluminum housing reflects the LED light back out through the ceramic
You must log in to add this fixture to a project!
